1 6

Sage Merino

2 899 kr
2 899 kr
Sale Sold out

A luxurious and wrinkle-free fabric with a nice drape, made from 100% merino wool. Presented here in a green/grey tone with a single chest pocket and our popular Turndown collar. Dress up with a suit and tie or leave two buttons unbuttoned for a more casual look with denims. The merino wool has excellent breathability for the summer but is also perfect as a layer-on-layer garment for the colder months. We recommend airing the garment to get rid of any odor, but it can also be washed at 30 degrees.

Sage Merino

2 899 kr

Design

Choosing design

Selecting a design for your made-to-measure shirt is partly about what goes together, but most of all it is about what you like. Once again, the purpose of the shirt and your personal style preferences should be the key considerations of your choice. Shirtonomy's ambition is to only offer the design alternatives that we find most compelling.

 

Uncertain? We have made it simple for you by always offering every fabric default design options. The default design has been engineered to match each fabric's specific character to ensure our customers always have a well-matched shirt.

Collar style

Cutaway

This collar got its name from its tips which are shaped away from each other, giving it an elegant and tasteful appearance. The moderate spacing between the collar tips make the Cutaway model one of the most versatile of all. It works just as well with a suit as it does with leisure wear; or with a narrow or wide tie knot.

Specifications: Collar height rear edge 4.0 cm; collar tip length 6.7 cm; spacing between collar tips 11.5 cm. Moderate rigidity.

 


Full Spread

The generous spacing between tips gives this collar model a formal and elegant look, making it perfect to combine with a tie and jacket. While the Full Spread collar works with both a broad and narrow tie knot, it should not be matched with a tie that is too narrow. If you would like a collar model that works with a wider range of looks we recommend the Cutaway instead.

.

Specifications: Collar height rear edge 4.0 cm; collar tip length 8.0 cm; spacing between collar tips 13.5 cm. Moderate rigidity.


Turndown

Turndown stands out with its relatively long and downward-pointing collar points, a clear contrast to spread collar models that have been the default choice for business shirts in the past decade. Turndown has a significant gap between the points leaving space for a well-tied four in hand knot. The collar's interlining is of medium stiffness, which gives a more relaxed impression. We strongly recommend that this collar be worn with a tie, preferably without collar bones, so that the collar points during the day get a smooth roll.

Specifications: Collar height rear edge 4.2 cm; collar tip length 9.3 cm; spacing between collar tips 12.5 cm. Soft rigidity.




Extreme

Like the Full Spread collar, this collar has a broad open cut but has the collar tips cut along the neckline on an even tighter angle. Because of the generous spacing between tips we recommend wearing the Tudor collar with a tie and jacket. It works with both broad and narrow tie knots, although you should avoid tie models that are too narrow. Make sure the tie is tightened properly around the neck to ensure exposing too much of the area around the neck.

Specifications: Collar height rear edge 4.0 cm; collar tip length 8.5 cm; spacing between collar tips 16.5 cm. Moderate rigidity.




Club

This collar originated with International English school students but today is perhaps more well known among preppy fashion ambassadors. The Club collar is a nice alternative for those who want to break with the more conventional collar models, without risking being seen as a pretender. We recommend it be combined with shirts of light single color, or with narrow striped fabrics. The collar also works well with a tie done with a narrow knot.

Specifications: Collar height rear edge 4.0 cm; collar tip length 7.0 cm; spacing between collar tips 11.0 cm. Moderate rigidity. Delivered without collar stiffeners.



Sport Button-Down

 

A sporty and somewhat toned down version of the Button-down collar. This collar's casual appearance makes it a suitably appropriate choice for all types of casual shirts. The collar works particularly well when matched with Oxford fabric. Combine it with a thin tie and you will be guaranteed entrance to Yale! If you do wear a tie with this collar the knot should be of a narrower variant (like four in hand) to get the best combination with the collar points. Remember you should never wear a button down collar to the most formal of occasions such as weddings or funerals. Note: This collar includes a little button at the back which helps ensure it remains in place.

Specifications: Collar height rear edge 4.0 cm; collar tip length 6.5 cm; spacing between collar tips 7.0 cm. Soft rigidity. Delivered without collar stiffeners.


Formal Button-Down

The button down collar is one of the classic cuts. The collar is as much at home in the board room of an American investment bank as it is worn while sitting at a café in Florence sipping on a double espresso. The long tips combined with the distance between the buttons creates a tangible "soft roll". The collar's proportions make it perfectly matched to a tie and jacket. If you do wear a tie with this collar its knot should be of a narrower variant (like the four in hand) to get the best combination with the collar points. If you are after a more casual feel with your shirt you should instead consider the Sport Button Down. Remember you should never wear a button down collar to the most formal of occasions such as weddings or funerals.

Specifications: Collar height rear edge 4.2 cm; collar tip length 9.3 cm; spacing between collar tips 9.0 cm. Moderate rigidity. Delivered without collar stiffeners.


Hidden Button-Down

Based on the same cut as the Formal BD, but with the buttons hidden beneath the collar wings. Hidden BD is an excellent choice when you desire a "soft roll" look but prefer not to display the buttons that are associated with a button-down collar. This collar is equally well paired with a tropical linen shirt as with a white poplin shirt worn in the office. If you do wear a tie with this collar its knot should be of a narrower variant (like the four in hand) to match the narrowness of the collar points.

Specifications: Collar height rear edge 4.2 cm; collar tip length 9.3 cm; spacing between collar tips 9.0 cm. Moderate rigidity. Delivered without collar stiffeners.


High Spread

 

The generous spacing between tips gives this collar model a formal and elegant look, making it perfect to combine with a tie and jacket. While the Full Spread collar works with both a broad and narrow tie knot, it should not be matched with a tie that is too narrow. If you would like a collar model that works with a wider range of looks we recommend the Cutaway instead.

Specifications: Collar height rear edge 5.1 cm; collar tip length 9.7 cm; spacing between collar tips 15.6 cm. Moderate rigidity.


Tab

 

 

Mandarin

 

Collar stays

Please choose if you would like the collar stiffeners, which provide extra stability to the collar, to be removable or not. The advantage with sewn in collar stiffeners is that you never need to remove them for washing, taking away any risk of losing or forgetting them. The advantage of removable collar stiffeners is that you have more options as to how you wear the shirt. For instance, removing them would give the shirt a softer, more informal collar. You can also choose to have the shirt sewn without space for collar stiffeners, something that is mandatory for collar models Button down and Club.

Collar seam

Choose if you would like a standard collar seam (5 mm from edge) or if you want the seam to be adjacent to the collar's edge (2 mm from edge). Standard seams are normal for modern shirts. Placing the seam adjacent to the collar's edge gives a somewhat elegant impression that many appreciate. If you are unsure or do not have any particular preference we recommend choosing the standard seam. Note: the choice of seam for the collar is always matched on the outer edges of the cuff.


Cuff type

Singel rounded

Classic rounded cuffs with a button that works well on almost all occasions. Their all-purpose style means they can easily be combined with both formal and informal fabrics.

Specifications: Cuff length 7.5 cm. One button. Rigidity dependent on chosen collar model.



Short rounded

Based on the same cut as the previous cuff model, but somewhat shorter in length, resulting in a more casual look. For this reason these cuffs combine particularly well with some of our more casual fabrics.

Specifications: Cuff length 5.5 cm. One button. Rigidity dependent on chosen collar model.


Two buttons,angled

Simple cuffs with an angled cut, two buttons and of normal cuff length. A slightly more unusual option compared to their round cut counterparts. Goes well with most fabrics and suitable for most occasions.

Specifications: Cuff length 7.5 cm. Two buttons. Rigidity dependent on chosen collar model.


French rounded

Classic French (double folded) cuffs which always deliver a flawless, elegant and formal impression. These cuffs are suitable only in combination with a suit or jacket, and therefore should always be matched with our more formal fabrics. The choice of rounded or angular French cuffs is purely down to personal taste, although many argue that the rounded variety moves more freely in the jacket sleeve. We advise that these collars be combined with the Button Down collar.

Specifications: Cuff length 7.5 cm. No buttons. Rigidity dependent on chosen collar model.


Angled French

A French cuff constructed in the same manner as the rounded French cuff and therefore maintaining the same level of formality. The angled French cuff worn is always worn with a suit or blazer and best combined with one of our formal shirt fabrics. We advise against combining these cuffs with the Button Down collar.

Specifications: Cuff length 7.5 cm. No buttons. Rigidity dependent on chosen collar model.


The plaque

Smooth

The smooth placket is a good alternative for those striving after an elegant and formal look. The smooth placket is created by double folding the fabric on the shirt's inside. In our opinion the smooth placket works best when combined with a striped or single colored shirts.

Classic

The classic placket is double edged and works well with most fabrics. It is not considered to be as formal as the smooth placket as it creates a more rugged look. The classic placket is therefore a good alternative if you choose a fabric with more informal characteristics.

Popover

The Popover shirt has gotten much of its inspiration from the classic Piké. The plaque stretches over half the chest whilst the lower part is in one part. The result is a nice balance between casual and sophisticated.

The placket of the popover shirt consists of a total of four buttons (three studs and a COLLAR STUD) with a final enhanced Crosshem. You can combine your popover shirt with most of the outfits as long as it gives a relaxed look, if you ask us.

We prefer to combine the Popover with a fabric of a more rustic character (oxford or linen), simple cuff and always select removable collar stays (which you remove and throw in the bin).

NOTE: Important information regarding your measurements when buying a Popover shirt.

Since the Popover cannot be unbuttoned all the way down like a standard shirt, your measure profile may have to be adjusted accordingly. The Popover is put on over the head (like a tennis shirt) and whilst the tennis shirt fabric is elastic our fabrics aren't. Hence a Popover which is made very slim fit will not be possible to put on.

We strongly advise you to create a specific profile for your popover shirt where you add about 1½ cm to your normal size for chest, waist and hip . If your regular profile dimensions are very figure hugging or if you have a marked wasp waist, you should add an additional few centimeters of the above mentioned dimensions to be able to wear your popover. Remember that the popover shirt of nature gives a relaxed impression, which means that there is not the same need to seek a quite as tight fit as your business shirt.

A tip for checking if your measures will work would be to button your present shirt up to the chest and then try to put it on over the head. If you manage to do that without too much of an ordeal your measures should be fine.

Button type

Luna


As a standard, all of Shirtonomy's shirts come with our specially designed natural white plastic button, Luna. It's hue, shape and size works well with all of our fabrics and design choices.

Specifications: Diameter 10.7 mm; height 2.4 mm. Natural white. Made of plastic.


Nemo

A button made of genuine mother of pearl from river shells which gives the button a porcelain-like surface. This white tone makes it a perfect match for all white fabrics. The shape is somewhat flattened which gives it an elegant and neat appearance.

Specifications: Diameter 10.1 mm; height 1.9mm. True white. Made from genuine mother of pearl.

Gizo

A button from genuine mother of pearl taken from seashells. Gizo has a deep luster and a natural white tone. Its shape is somewhat larger than other button models without feeling excessive.

Specifications:Diameter 10.1mm; height 3.5 mm. True white with a typical mother of pearl luster.Made from genuine mother of pearl.

Please note that mother of pearl is a durable and natural material that over time will gain a wonderful patina. We would like to raise a warning to those who feel the need to leave their shirts in the hands of their local dry cleaner. Unfortunately not all drycleaners handle your shirts in the loving and respectful way that they should be cared for, creating a risk that buttons may be removed prematurely.

 

Coco

Mid brown button made of genuine horn. Horn buttons make a natural and laid back impression and are therefore easily paired with casual fabrics. Horn buttons are a good option for darker fabrics if you are looking for a softer contrast between the button and the fabric.

Specifications: Diameter 10.7mm; height 2.4 mm. Middle brown. Made of horn.


Java

Dark brown button made of genuine horn. Horn buttons make a natural and laid back impression and are therefore easily paired with casual fabrics. Horn buttons are a good option for darker fabrics if you are looking for a softer contrast between the button and the fabric.

Specifications: Diameter 10.7mm; height 2.4 mm. Dark brown. Made of horn.



Emerald


Onyx

 

Midnight

Andra Knappar

Thread color

Buttom thread color

By default, all buttons are sewn onto the fabric with a thread that matches the color of the button. As Shirtonomy only offers white buttons our thread is also by standard white. Should you wish to use a different color thread please click on "Choose color" and make your choice.

 

Button hole thread color

As per standard our button holes are sewn with a thread that matches the color of the shirt's fabric. If you would like the button holes to be sewn in a difference color please click on the "choose color" and make your choice

Pocket

The breast pocket is generally regarded as an informal addition. We believe however, that as long as you are not attending a wedding or a funeral, you should make this decision based on your own preference. On an Oxford shirt, the breast pocket can be a rather appealing option. Even in an office environment a pocket can be a welcome addition, as long as it is not used as your personal pencil case.

Specifications:Height 13.0 cm, width 11.0 cm. Placed on the left breast

Standard

Specifications: Height 13,0 cm, width 11,0 cm. Placed on the left breast

Ficklock

Ficklock med knapp

Shoulder

The shoulder of the shirt can either consist of the 'standard' solid single piece of fabric or diagonally stitched pieces of fabric, the so-called 'split yoke' - The difference between these two options is primarily cosmetic. The split yoke, which is more time consuming to create, gives off a greater feeling of old school hand made craftsmanship, while it can also provide an increased level of comfort because fabric is more elastic when worn across the diagonal.

 


Monogram

Monogram is another way of making your shirt even more customized. The monogram consists of a maximum of three characters and may be placed either on the left side chest/pocket, left cuff or left kidney. There are three different fonts to choose from. Shirtonomy takes no responsibility for the selection of monograms but will consider editing monograms that may be offensive.

In the example above, Arial, Times New Roman and MonotypeCorsiva

Do you have any questions regarding the choice of fabric, the choice of design or how you should do your measurements? Do not hesitate to contact us so we can clear up any uncertainties before you finalize your order. We will reply as quickly as possible and our belief is that almost any issue can be resolved!

 

Collar Model
Collar Stitching
Collar Stays
Cuff Model
Placket
Button
Pocket
Back
Monogram
Split Yoke
Thread Color Button Thread
Thread Color Button Hole
Full White Collar
Full White Cuff
Translation missing: en.configurator_app.qualidade
Single Needle Stitch
Translation missing: en.configurator_app.garment-wash
Arial

ABCDEFGHI
abcdefghi

 Ash Cashmere Bergamo Raw Denim Black Linen Black Oxford Blue Oxford Brown Camel Cashmere Charcoal Merino Como Chambray Denim Cream Cashmere Cream Safari Dark Green Dark Green Oxford Dark Red Emerald Linen Forest Flight Jacket Garoupe Linen Honey Overshirt M2 Ice Cashmere Ice Safari Ink Cashmere Ivory Linen Jet Overshirt M2 John Oxford Lightblue Marcella Plain Bib Marcella Stud Bib Marine Seersucker Merton Oxford Mid Blue Mid Blue Pinpoint Mid Green Midnight Flight Jacket Midnight Merino Mint Seersucker MonotypeCorsiva

ABCDEFGHI
abcdefghi

 Navy Navy Oxford Olive Linen Olive Merino Onyx Flight Jacket Orange Pink Pink Herringbone Pinstripe heavy oxford Portofino Linen Prussian Overshirt M2 Purple Red Roubini Oxford Royal Bengal Royal Boat Stripe Royal Seersucker Rust Linen Sahara Linen Translation missing: en.configurator_app.siena-gingham Sky Bengal Sky Boat Stripe Sky Diamond Twill Sky Grid Sky Linen Sky Mini Gingham Sky Pinpoint Sky Puppy Twill Sky Twill Sky VIX Stripe Times New Roman

ABCDEFGHI
abcdefghi

 Tobacco Linen Translation missing: en.configurator_app.tone-on-tone Vanilla Oxford Wheat heavy oxford White white-giza-poplin White heavy oxford White Oxford White Pinpoint White Royal Oxford White Seersucker White Twill Wine Cashmere Yellow Yield Stripe

Sport BD

Coco (+69 kr)

Cutaway

Split yoke (+59 kr)

Emerald (+69 kr)

Single Round

Extreme

Flap

Flap with Button

Formal BD

French Angled

French Round

Full Spread

Gizo (+99 kr)

Hidden BD

High Spread

Darts

Slanted

Near Edge

Standard

Java (+69 kr)

Box

 Colour: (Change)

Kort ärm

Short Round

Removable

Luna

Mandarin

Midnight (+69 kr)

Box Pleat

No

Nemo (+89 kr)

Normal

Onyx (+69 kr)

Popover (+59 kr)

Plain

Plain

Standard yoke

Tab

Turndown

Two Button

Without

 Colour: (Change) Font: (Change)
Text: You have selected a monogram, but no text has been added
Colour: (Change) Font: (Change)
Text: You have selected a monogram, but no text has been added
Colour: (Change) Font: (Change)
Text: You have selected a monogram, but no text has been added

Composition

100% merino wool

Weave

Twill

Yarn

Warp: 36/1, Weft: 36/1

Weight

134 gr/m2